manual feeder with operator or with automatic feeder with hight pile
sheet size max: 2800 x 10.000. mm.
minimal size 360 x 620 mm.
board thickness from 2,5 to 16 mm.
repeat precision: +/- 1 mm.
machine speed from 0 to 180 mt. minute
cycle time multi toll speed slide: approx. 0,5 sec.
cycle time cross bar: approx. 0,6 sec.
minimum benzene 2 creasers: 0 mm.
minimum between 2 slotter: 0 mm.
board line: 1000 mm.
main drive: brushless
drive multi toll speed slide: brushless
drive crossbar: brake motor 4 Kw. with reduction gear
voltage / power requirement: 440 V 3+N+PE / 50 Hz / 18 Kw.
air consumption: 150 l. / min. , 8 Bar
dimension, machine working position: without platform and cabinet approx. 7 x 4 x 2 mt. (L x W x H)
Total weight: 7000 Kg.
Standard Main Functions:
in machine direction (at slitter-creaser)
- precrushing
- creasing
- trimming
- slitting off 2 outs
cross machine direction (at cross bar)
- slotting
- creasing
- pre-crush for stitch flap edge and box end (max 40 mm. width)
cross machine direction (at multi tool speed slide)
- cut-off
- creasing
- perforation
- off set slitting
- off set creasing
- off set perforation
Additional functions (OPZIONAL)
- trimming of stitching flap edge (up to 8 cuts)
- die-cutting for hand holes, or air holes, etc., max die cutting size 180 mm. x 200 mm., max up N° 3 units
- offset-creasing and cutting - top or bottom perforating in machine direction
- prints, max printing die 300 x 500 mm.
- slotting in machine direction up to 8 slots
- V notches